NEEWER Q4 400W Strobe Flash 2.4G TTL Trigger QPRO-C (Canon) 10102782

NEEWER Q4 400W Strobe Flash 2.4G TTL Trigger QPRO-C (Canon) 10102782. The 400W Q4 battery powered strobe light features a compact rectangular design. With its impressive GN72 with high performance reflector (not included), 30W/5600K/CRI95+ LED modeling lamp, it meets shooting needs. Note: Do not trigger the flash without plugging in the flash tube, as this will damage the equipment.

 

 

 

 

 

 

 

 

 

TTL / MANUAL / MULTI FLASH MODE

 

 

Three flash modes: TTL, Manual and Multi (strobe). Supports exposure compensation; 1/8000 high speed sync; manual power control, modeling light, first/second curtain sync, etc. Multi controls strobe rate up to 100 times. Support S1/S2 modes, C.Fn custom setting. Support for USB Type C firmware upgrades.

 

 

 

21.6 V / 2800 mAh LITHIUM BATTERY

 

Increased battery capacity provides 400 full power flashes, 0.01-1.2 s recycling time and 1/209 to 1/10989 s flash time, perfect for capturing continuous action. Battery compartment for easy replacement of spare batteries. With a DC charging port, the flash can be powered via the included adapter and takes about 3.5 hours to fully charge.

 

 

 

 

 

QPRO-C TRIGGER & BUILT-IN 2.4G Q SYSTEM

 

Works with QPRO-C trigger to trigger flash up to 5 group, 32 channels and ID 01-99 within 100m radius, compatible with Canon R6 R5 R3 R M6 850D 800D T7i 760D T6s 7500 D T6i 6 50D 600D 7D Mark II 7D 6D Mark II 6D 5D Mark IV III II 1D Mark III 1DX 550D 500D 450D 90D 80D 70D 60D 50D 1100D 77D SL3/2 Cameras 50D T7 1500D 2000D T1000D 30000 D 4000D (NOT compatible with RP R50). Note: Upgrade firmware if incompatibility.

 

 

 

BOWENS MOUNTING FIXING

 

The Bowens bracket used can connect the monolight to various light modifiers, such as reflectors, softboxes, snoots. Package includes 1 x Q4 Strobe Flash, 1 x QPRO-C Wireless Trigger, 1 x Standard Reflector, 1 x Lithium Battery, 1 x Handle, 1 x Power Cord (EU Plug), 1 x Power Adapter, 1 x Carrying Case. Please note that you can only use the included AC adapter/cord to charge.

 

 

 

SPECIFICATIONS

 

Model: Q4

Power: 400W

Flash duration: 1/209 s to 1/10989 s

Recycling time: approx. 0.01-1.2 s

Output power 9 steps: 1/256-1/1

Flash Modes: M/Multi (Wireless Off), TTL/M/MULTI (Radio Transmission Receiver Unit)

Optical slave flash: S1/S2

Delay flash: 0.01 to 30 s

Strobe Flash: Provided (up to 100 times, 199 Hz)

Sync modes: HSS (up to 1/8000 s), first/second ridea synchronization

Full Power Flash: 400

Modeling lamp (LED): 30 W / 5600 K / CRI 95+

Colour temperature: 5600 ± 200 K

Flash Exposure Compensation (FEC): Manual FEB: +/-3 stops in 1/3 stop increments

2.4G wireless Q system: 32 channels, 5 groups (A/B/C/D/E)

2.4G transmission range: 100 m

Wireless ID: In order to avoid interference, you can change the wireless transmission channel and Wireless ID of the master and slave unit and make them consistent before triggering

Power supply: lithium battery (included) / DC adapter (included)

Energy saving: the flash can be set to turn off automatically without operation for 30-120 min.

Trigger modes: 2.4G, S1/S2, 3.5mm synchronous cord, flash test wire

Rechargeable Li-ion battery: 21.6 V / 60.48 Wh / 2800 mAh

Masking function: yes

Built-in silent fan: yes

Display Flash Duration: yes

Battery power indication: yes

Display: Matrix screen

Strobe dimensions: 18.5 x 21 x 15.5 cm

Net weight: 2.24 kg (excluding lamps and reflector)

Package content: 1 x Q4 Strobe Flash, 1 x QPRO-C Wireless Trigger, 1 x Standard Reflector, 1 x Lithium Battery, 1 x Handle, 1 x Power Cord (EU Plug), 1 x Power Adapter, 1 x Carrying Case