Ermenrich NetGeeks NP25 PoE Tester

Ermenrich NetGeeks NP25 is a PoE cable tester for PoE-powered networks. It is used for setting up IP telephony, deploying IP surveillance systems, connecting wireless access points, etc. The Ermenrich NetGeeks NP25 supports all types of PoE devices. It can check the serviceability of cables, identify the PSE type, identify the midspan/endspan, and measure power and voltage.

The device includes a transmitter and a remote unit. The transmitter requires three standard batteries (not included). Compact and lightweight, the Ermenrich NetGeeks NP25 is easily operated with just a few buttons. The results are displayed on the built-in backlit LCD display. Suitable for testing STP/UTP cables (CAT5, CAT6), telephone cables. The length of a tested cable should not be longer than 600 meters (1970ft).

Key features:

• Identification of the PSE type (standard or non-standard), midspan/endspan identification
• Power and DC voltage testing, powered device test function
• Testing cables for open circuits, short circuits, crossed pairs
• Testing cable types: STP/UTP (CAT5, CAT6), telephone cables
• Power supply (transmitter only): 3pcs AAA alkaline batteries

The kit includes:

• Transmitter
• Remote unit
• RJ11 patch cord
• RJ45 patch cord
• Alligator clip
• DC cable
• Carry bag
• User manual and warranty card

Brand	Ermenrich
Warranty, years	5
EAN	5905555016856
Package size (LxWxH), cm	18.5x4.5x11
Shipping Weight, kg	0.26
PoE test	yes
Powered device (PD) test	yes
Voltage polarity detection	yes
=== Delimiter ===	PoE test
Midspan/endspan identification	yes
Operating voltage range (DC), V	5 - 60
Power measurement range, W	0 - 18
=== Delimiter ===	Powered device (PD) test
Operating voltage range (DC), V	5 - 60
Current measuring range, A	0 - 3
Power measurement range, W	0 - 18
Display resolution, px	128х64
Display backlight	yes
Operating humidity range, %	20…70
Ports	RJ45, PoE, Loopback, DC (input), DC (output)
Tracing cable types	telephone, STP/UTP (CAT5, CAT6) network cable
Maximum length of the tested cable, m (ft)	600 (1970)
Cable testing	+, (open circuits, short circuits, crossed pairs)
Loop-back test function	+, compatible with 10/100Mbps switches
Power source equipment (PSE) type test	standard (IEEE 802.3at/af)/non-standard
Maximum operating current, mA	≤80
Protection	input voltage: 48V, current: 5mA
Display	LCD
Power supply	AAA alkaline batteries – 3 pcs. (not included)
Auto power off	15 min, 60 min, 30 min
Operating temperature range,°C	−10… +60 (14… 140)
Ports	RJ45

In trade: available
Price: 60.00 €

Printing date: 2026 06 13 03:40:40